You can use the Sensor List section to identify and configure the sensors that Arctic Wolf® will provision and ship.

1. In the Site Configuration section, expand No sensors.
2. Click + Configure Sensor.
3. Enter information about the sensor:
   • Sensor Name — Enter a unique name for the sensor.
   • Sensor Series — Select the sensor series, and then configure any hardware settings that are required.
     Note:

     Different options appear depending on the model you select. For example, Deployment Type, Transceiver type, or a Customer Configured Appliance.

   • Site — Select the site location.
4. In the IP Configuration section, enter the IP configuration information. In the Static IP Address field, enter a static IP address. If you cannot provide a static IP address, select the I can't provide a static IP address right now checkbox.
   Note:

   If you are using a customer-configured appliance, you must provide the static IP address using a console session.

5. In the Shipping Contact section, enter the shipping contact information. You can choose an existing contact or create a new one.
6. In the Shipping Address section, enter the site that Arctic Wolf will provision and ship the sensor to. You can choose an existing sensor or create a new one.
7. In the Shipping Notes section, enter any extra information about shipping that might be required.
8. Do one of these actions:
   • To configure another sensor, click Save & Add.
   • To stop configuring sensors, click Save.
9. When you are finished adding sensors, click Mark Complete.