Configure VMware ESXi syslog forwarding using VMware PowerCLI

You can configure syslog setting across multiple VMware ESXi hosts simultaneously using VMware PowerCLI. This method is recommended for automation.

Ces actions sont requises :

  • Ensure VMware PowerCLI is installed and connected to the target VMware vCenter environment.

Ces ressources sont requises :

  • An activated and dedicated Virtual Log Collector (vLC)
    Note: Due to the high event volume observed during Early Access (EA) customer deployments, this integration requires a dedicated vLC to help maintain platform stability and performance and to reduce the risk of service disruptions caused by excessive log volume.
  • Administrator access to VMware ESXi environments through the vSphere Client or ESXi Host Client
  • Network connectivity between VMware systems and the vLC

Configure syslog forwarding

  1. Run this command to set the syslog destination:
    PS 
    Get-VMHost | Get-AdvancedSetting -Name Syslog.global.logHost | Set-AdvancedSetting -Value "udp://<vlc_ip>:514" -Confirm:$false

    Where vlc_ip is the IP address of your vLC.

  2. Run this command to set the logging level:
    PS 
    Get-VMHost | Get-AdvancedSetting -Name Syslog.global.logLevel | Set-AdvancedSetting -Value "info" -Confirm:$false
  3. Run this command to enable the syslog firewall exception on each host:
    PS 
    Get-VMHost | Get-VMHostFirewallException -Name syslog | Set-VMHostFirewallException -Enabled $true

Provide configuration information to Arctic Wolf

  1. Sign in to the Arctic Wolf Unified Portal.
  2. Dans le menu de navigation, cliquez sur Ticket et alertes > Tous les tickets.
  3. Perform the appropriate action, depending on if you are:
    • A new customer — In the Ticket Type list, select Onboarding. Then, click the existing [Deploy] Site Config: <ticket_subject> ticket.
    • An existing customer — Click Open a New Ticket.
  4. On the Open a New Ticket page, configure these settings:
    • What is this ticket related to? — Select General request.
    • Subject — Enter Syslog changes.
    • Related ticket (optional) — Keep empty.
    • Message — Enter this information for your Concierge Security® Team (CST):
      • Confirmation that you completed the steps in this configuration guide.
      • The IP address or hostname of the Arctic Wolf Sensor that you used during the configuration.
      • The IP address, timezone, and device type for all sources that you are forwarding.
      • Questions or comments that you have.
  5. Click Send Message.

    Your CST reviews the details to make sure that Arctic Wolf is successfully processing the logs.