Update the network parameters

  1. Connect to the serial console. For more information, see Connect to the serial console.
  2. On the main task screen, on the management interface, select Reconfigure.
  3. Select either DHCP or Static networking to configure your management interface.
  4. If you select Static networking, configure these settings:
    • IP address
    • Netmask/Subnet
    • Primary DNS server
    • Secondary DNS server
    • Gateway
  5. Click Next.

    A series of connectivity tests are run. If the tests:

    • Pass — You are redirected to the main task screen.
    • Fail — Click Back to return to the previous screen, and then change the configuration and rerun the connectivity tests.