Configure Ubiquiti UniFi to send logs to Arctic Wolf

You can configure the Ubiquiti UniFi platform to send logs to Arctic Wolf®.

Note: This integration was tested against UniFi Network Application version 9.4 and lower. This guide also includes steps for configuring 10.x.

Folgende Ressourcen werden benötigt:

  • An activated Arctic Wolf Sensor or Virtual Log Collector (vLC)
  • Correctly configured date, time, and timezone on the UniFi controller
  • Access to a device in the same network as the UniFi controller
  • Administrator access to the UniFi controller web interface

Configure the syslog settings

  1. Sign in to the UniFi controller web interface.

    Your UniFi controller web interface URL is the IP address of your controller, similar to https://192.168.1.1/.

  2. Click Settings > CyberSecure.
  3. Click the Traffic Logging tab.
  4. For Activity Logging (Syslog), select SIEM Server.
    Note:
    • Do not select Debug Logs or Netconsole.
    • Arctic Wolf sensors do not process NetFlow/IPFIX data. Do not enable NetFlow/IPFIX export to the Arctic Wolf sensor. If it is already enabled, disable it.
  5. For Contents:
    1. Click Edit.
    2. If you are using UniFi Network Application version 10.x or later, under Devices, select Gateway.
      Note: The Gateway checkbox is different from the Gateway DNS option on the Traffic Logging page.
    3. Make sure that only these log categories are selected:
      • Admin Activity
      • Critical
      • Devices
      • Security Detections
      • Triggers
      • VPN
      • Firewall Default Policy
    4. Click Save.
  6. In the Server Address field, enter the IP address for the Arctic Wolf Sensor, Virtual Sensor (vSensor), or Virtual Log Collector (vLC).
  7. In the Port field, enter 514.
  8. For Logging Levels, make sure that Auto is selected.
  9. Click Apply changes.
Note: UniFi does not currently support exporting traffic flow logs to SIEM servers through syslog. Traffic flow logs are not sent to Arctic Wolf even when Traffic Logging is enabled. For more information, see Traffic Flows and Traffic Logging in UniFi Network.

Provide configuration information to Arctic Wolf

  1. Sign in to the Arctic Wolf Unified Portal.
  2. Klicken Sie im Navigationsmenü auf Tickets & Warnungen > Alle Tickets.
  3. Perform the appropriate action, depending on if you are:
    • A new customer — In the Ticket Type list, select Onboarding. Then, click the existing [Deploy] Site Config: <ticket_subject> ticket.
    • An existing customer — Click Open a New Ticket.
  4. On the Open a New Ticket page, configure these settings:
    • What is this ticket related to? — Select General request.
    • Subject — Enter Syslog changes.
    • Related ticket (optional) — Keep empty.
    • Message — Enter this information for your Concierge Security® Team (CST):
      • Confirmation that you completed the steps in this configuration guide.
      • The IP address or hostname of the Arctic Wolf Sensor that you used during the configuration.
      • The IP address, timezone, and device type for all sources that you are forwarding.
      • Questions or comments that you have.
  5. Click Send Message.

    Your CST reviews the details to make sure that Arctic Wolf is successfully processing the logs.