Onboarding and Self-Service

Onboarding Portal

Updated Jan 25, 2024

Configure your sensor list

You can use the Sensor List section to identify and configure the sensors that Arctic Wolf® will provision and ship.

  1. In the Site Configuration section, expand No sensors.

  2. Click + Configure Sensor.

  3. Enter information about the sensor:

    • Sensor Name — Enter a unique name for the sensor.
    • Sensor Series — Select the sensor series, and then configure any hardware settings that are required.

      Note: Different options appear depending on the model you select. For example, Deployment Type, Transceiver type, or a Customer Configured Appliance.

    • Site — Select the site location.
  4. In the IP Configuration section, enter the IP configuration information. In the Static IP Address field, enter a static IP address. If you cannot provide a static IP address, select the I can't provide a static IP address right now checkbox.

    Note: If you are using a customer-configured appliance, you must provide the static IP address using a console session.

  5. In the Shipping Contact section, enter the shipping contact information. You can choose an existing contact or create a new one.

  6. In the Shipping Address section, enter the site that Arctic Wolf will provision and ship the sensor to. You can choose an existing sensor or create a new one.

  7. In the Shipping Notes section, enter any extra information about shipping that may be required.

  8. Do one of these actions:

    • To configure another sensor, click Save & Add.
    • To stop configuring sensors, click Save.
  9. When you are finished adding sensors, click Mark Complete.